Metal sculpture production process: According to the design plan and model, use stainless steel plates for cutting, grinding, bending and welding processes. The stainless steel plate can be specially processed according to the shape of the sculpture, such as splicing, stretching, embossing and other techniques to produce complex shape effects. Among them, embossing and embossing hydraulic press equipment will be used in processes such as stretching, arc pressing, and embossing.
Metal sculpture pressing and forming equipment - embossing flower hydraulic press, mainly used for stamping and stretching of metal materials, and can also realize the pressing process of metal and non-metal. A closed frame is composed of the upper beam, the lower beam, 4 columns and 16 inner and outer nuts, and the frame bears all the working loads. The working cylinder is fixed on the upper beam, and a working plunger is connected with the movable beam in the working cylinder. The movable beam is guided by 4 columns, and moves back and forth between the upper and lower beams. An upper anvil is fixed under the movable beam, and the lower anvil is fixed on the workbench on the lower beam. When the high-pressure liquid enters the working cylinder, it will generate great pressure on the plunger, pushing the plunger, the movable beam and the upper anvil to move downward, so that the workpiece will be plastically deformed between the upper and lower anvils. At the same time, the return movement is realized after the work is completed.
Composition structure of metal sculpture stamping forming hydraulic press
1. Body
Metal Sculpture Pressing and Forming Equipment - Embossed Flower Hydraulic Press The fuselage is a four-column structure, consisting of an upper beam, a slider, a lower beam and four columns, which are fastened by nuts to form a closed rigid frame. The slider and the main cylinder piston The rods are connected and move up and down with the column as the guide. There are oil holes on the slider to refuel regularly to lubricate the moving parts. There are T-shaped slots on the lower plane of the slider and the upper plane of the workbench for the installation of molds.
2. Main oil cylinder
The oil cylinder is piston type, which is composed of oil cylinder body, piston rod, guide sleeve, sealing ring, connecting nut and other parts. The oil cylinder is fastened in the upper beam by the lower shoulder and the upper nut, and the lower end of the piston rod is connected with the slider through bolts. When oil enters the upper or lower chamber of the main oil cylinder, it drives the slider to go down or return.
3. Main stroke limit
The device is composed of a guide groove plate, a collision block, a bracket, and a travel switch. The travel switch is installed on the bracket, and the groove plate is installed on the slider to move up and down with the slider. By adjusting the position of the collision block, you can set The upper and lower limit positions, fast and slow rotation and other signal transmission points, so as to control the conversion position of each action of the metal sculpture pressing and forming equipment - embossing flower hydraulic press
4. Hydraulic power system
This system is composed of energy conversion device (pump, oil cylinder), energy adjustment device (hydraulic valve), energy transmission device (oil tank, pipeline), etc., with the help of electrical control system, it drives the slider to move and completes various technological actions.
5. Fuel tank
The oil tank of this machine is placed on the rear side of the upper beam of the metal sculpture pressing and forming equipment - embossed flower hydraulic press. The valve block, hydraulic components and oil pump motor unit are placed on the oil tank. The fuel tank is equipped with air filter, liquid level gauge, oil filter and other devices.
+86-13509801050
E-mail
