DELISHI/GOODSJACK hydraulic presses are widely used in the production of auto parts and automotive interior parts. The most commonly used hydraulic presses are 500-ton, 650-ton, 800-ton and 1000-ton frame rail hydraulic presses. Frame hydraulic presses above 650 tons are mainly used to produce car doors and car glass lifter shells and other products.
Hydraulic Press Machine For Automotive Interior Parts
Performance characteristics of the four-column frame hydraulic press machine for drawing and stamping of new energy electric vehicle interior accessories parts:
1. The auto parts forming hydraulic press has two structures: four-column and frame. The fuselage adopts finite element structural analysis and optimization design, and the structure is reasonable.
2. The multi-cylinder structure can be adopted to ensure that the large table can bear even pressure.
3. The hydraulic system is controlled by an integrated cartridge valve, which is sensitive, reliable and leak-free;
4. The electrical system controlled by PLC has reliable performance and good flexibility;
5. The hydraulic press is equipped with a hydraulic safety circuit and a locking mechanism at the upper dead point of the slider, with good safety performance.
6. The working pressure of the slider, the travel range of the no-load fast descending and the slow working advance can be adjusted according to the needs of the process.
This hydraulic press is suitable for various stamping processes such as stretching, bending, forming, blanking, flanging, etc. It is especially suitable for the following fields:
Auto parts: body covers, brake pads, fuel tanks, chassis, axle housings, bumpers;
Household appliances: washing machine parts, rice cooker parts, TV parts, refrigerator parts, etc.;
Kitchen utensils: sinks, pots, stainless steel utensils, other various containers;
Others: tractors, motorcycles, aerospace, aviation.
Auto parts forming hydraulic press is a kind of mechanical equipment that uses the static pressure of hydraulic oil delivered by oil pump to process metal, plastic, rubber, wood, powder and other products. It is commonly used in pressing process and press forming process, such as: forging, stamping, cold extrusion, straightening, bending, flanging, sheet drawing, powder metallurgy, pressing and so on. Its principle is to use Pascal's law to make use of liquid pressure transmission machinery, there are many types. Of course, the use is also varied according to needs.
The machine has an independent power mechanism and electrical system, and adopts the centralized control of buttons, which can realize three working modes: adjustment, manual and semi-automatic: the working pressure of the machine, the pressing speed, the stroke and range of no-load fast descending and deceleration, all can be adjusted according to the process. It needs to be adjusted, and the ejection process can be completed. Three process methods, the ejection process and the stretching process, are available. Each process has two types of process actions: constant pressure and fixed stroke. After pressing, the constant pressure molding process has Ejection delay and automatic return.
+86-13509801050
E-mail
