According to the material of the ceramic ring, it is recommended to use a hydraulic power compacting press for pressing the ceramic ring. It adopts a three-beam four-column or four-beam four-column structure design. The pressing time, pressure and product thickness can be adjusted appropriately. Ensure that the product pressure is stable, the density is constant, and the size error is small. The hydraulic system of the equipment often uses high-quality hydraulic components, which have high stability and avoid oil leakage. The working part and the hydraulic system part are separated and independent, and the heat dissipation is automatic, which reduces the equipment loss. Which are suitable for pressing products with high density requirements of ceramic rings. Special hydraulic press machine for ceramic ring with high precision, easy to replace and install the mold. high degree of automation.
Ceramic ring dry pressing:
Dry pressing: There are two types of hydraulic presses for ceramic rings: hydraulic and mechanical, which can be semi-automatic or fully automatic. The pressure of the press can reach 200Mpa.
The output can reach 15 to 50 pieces per minute. Since the stroke pressure of the hydraulic press is uniform, when the powder filling amount is different, the height of the pressed part is also different.
Hydraulic press for ceramic rings adopts two-way pressure forming system, which makes the equipment run stably and operates reliably; the electric control system is equipped with servo and industrial touch-screen PLC automatic control, and one side of the beam is equipped with Wire ruler displacement sensor, the system sets the position of the exhaust function, and the exhaust stroke position is set according to the compression ratio and working stroke of the powder molding product. All signals and data can be set through the touch screen;
Advantages of hydraulic press for ceramic rings:
1. The special hydraulic press for ceramic rings has high feeding accuracy and high dimensional accuracy of control ceramic rings;
2. The height of the powder cavity can be adjusted according to the requirements;
3. Two-way pressurization is optional, so that any part of the molded product is evenly stressed;
4. The upper and lower hardness is the same, to avoid the problem of upper hard and lower soft;
5. The electric control system is integrated in the power cabinet, and the external movable console is connected by an aviation plug, which is beautiful and elegant, easy to maintain and easy to use.
6. Hydraulic press for ceramic ring with high integration degree, the force mode can be selected arbitrarily;
7. Computer control, the database saves the pressing mode, and can be adjusted out for use.
The hydraulic powder compacting press can also be used to press silicon nitride and other ceramics, induction cooker insulation rings, graphite flanges, carbon rods, inorganic metal compound powders and other materials, and is widely used in piezoelectric ceramics, household ceramics , refractory materials and zirconium bricks, zirconium tubes, crucibles, etc. for smelting of precious metals.
+86-13509801050
E-mail
